| FEATURES |
- NXP (Philips) LPC2148 ARM7 based 32 bit
- GPIO Expansion header
- Expansion header for SPI and I2C bus.
- Expansion header for External interrupt
- Expansion header for DAC
- Expansion header to drive stepper motor
- On board ADC pot
- Debugging header with JTAG interface
- Min. 6 User programmable LEDs.
- Push button for simulating an external interrupt.
- USB Device side
- 1 X UART for programming and debugging
- 4 X 4 matrix keypad
- 16 X 2 LCD module
- 7 Segment Display
- The user shall be able to download/debug uCOS + user
application
- All required and related Software & Documentation CD on site
training
| INTERFACING MODULE (OPTIONAL) |
- GPS Interface : Serial cable & Power supply, Sample code on
CDROM
- Graphics LCD Interface Module: 240*128 Dots, Sample code
on CD ROM (Graphics & Character made)
- GSM Interface Module: GSM Module with Antenna , Serial
cable & Power supply, Sample code on CDROM
- Steeper Motor: +5 V ,Step Angle 7.5 Deg/1.5 Deg,Step Accuracy
+/-0.5 % to +/- 1 %, Torque – NMn, 6.3, Temp. Res. /
Winding – 100MOhm.
| |
|
|
