| General Description |
The model 4410 has 90 VDC motor with electronic speed controller,
a 2.75" (70mm) x 6.0" (152mm) crosslide, pulleys, belt, faceplate,
lathe dog, two dead centers, three hexagonal keys, sharpened
high-speed steel cutting tool, eight-foot and three-wire power
cord. In addition, it has a 24" (610mm) bed that has 17" (430mm)
between centers, a 2.5" (63mm) resettable “zero” handwheel on
the leadscrew, two 2" (51mm) resettable “zero” handwheels on the
crosslide and feed screw and a rocker tool post substituted for the
standard tool post used on the shortbed lathes. The electronic
speed control allows continuously variable speed control from 70
to 2800 RPM without belt changes.
| SPECIFICATIONS |
- Swing over bed: 3.50" (90 mm)
- Swing over carriage: 1.75" (45 mm)
- Distance between centers: 17.00" (430 mm)
- Hole through spindle: .405" (10 mm)
- Spindle nose thread: 3/4"-16 T.P.I .
- Spindle nose taper: #1 Morse
- Travel of crosslide: 4.25" (110 mm)
- Taper of tailstock spindle: #0 Morse.
- Protractor graduations: 0° to 45° by 5°
- Handwheel graduations: 0.01 mm
- Length overall: 37.25" (947 mm)
- Width overall: 10.75" (273 mm)
- Height overall: 8" (200 mm)
- Shipping weight: 30 lb. (13.6 kg)
- Motor: 90 Volt DC with electronic speed control, input: 220 VAC,
50 Hz or 60 Hz
- Spindle speed range: 70-2800 RPM continuously variable by
electronic speed control
- CNC stepper motor holding torque: 136 oz-in
- Rapid travel speed, X and Z: 22 inches/min
| |
|
|
