Search
Contact Us
 
Hydraulic / Electro Hydraulic TrainerVPL-PLC-HT / VPL-PLC-EHT

SALIENT FEATURES
  • Quick release socket plug arrangement for building circuits, Lighter pneumatic components are mounted using lever operated moulded adapters for quick release &placement.
  • Use of aluminium profile grooved plate (CD= 25MM) experiment board Optionally table drawers (3 Nos.) to store components when not in use & 4 Nos. of caster wheels.
  • Choice of 2 table top models Hydraulic (Electro) / Pneumatics (Electro) trainer (optionally PLC may be supplied.)
  • List of components may be modified as per your requirement.
TECHNICAL SPECIFICATION

    Item Hydraulic Trainer Qty Electro - Hydraylic Trainer Qty
    Oil Distribution
    and manual
    controls,
    gages
    Sub plate (1 station manifold) with 4 ports &
    2 gaugepots.
    2
    2
    Sub plate (1 station manifold) with 4 ports &
    gauge ports each equipped with
    2
    2
    Quick Release Male Adaptors 21 Quick Release Male Adaptors 13
    70 bar Gliserine filled pressure
    gauges to a and b ports.
    4 Modular Pressure relief valve (sub plate mounted) with 70 bar
    Gliserine filled pressure gauges to A & B ports (2 x 2)
    1
    4
    Throttle cum check valve sub plate mounted 1
    Direction
    Control
    Element
    4/2 way DC valve lever operated spring return. 1 4/2 way single solenoid 24 VDC spring return 1
    4/2 way DC valve, AC 230Vac solenoid operated spring return 1 4/3 way double solenoid 24 VDC spring return 1
    4/3 way DC valve, lever operated spring return. 1    
    4/3 way DC valve lever operated detented. 1
    Actuating
    devices
    (Output)
    Connections
    Single acting cylinder 40mm x 100mm stroke with QR adaptor 1 Single acting cylinder 40mmx100mm spring return & QR adaptor 1
    Double acting cylinder with in line flow control valve 40mm x
    100mm stroke & QR socket.
    1
    2
    Double acting cylinder 40mmx100mmn & QR adaptor 1
    A) Flexible hoses, R1 type ID with Quick release sockets
    (one end 90 & other straight) Length 2000mm
    Length 1200mm

    2
    2
    A) Flexible hoses, R1 type ID with Quick release sockets
    (one end 90 & other straight) Length 2000mm
    Length 1200mm

    2
    2
    B) Quick release plugs(M)
    Quick release sockets(F)
    21
    8
    B) Quick release plugs(M)
    Quick release sockets(F)
    13
    8
    Electrical
    Connection
    Mains cord for 230 Vac solenoid with stakable connector 1 Electrical circuit 4mm Banana Patch cord 1 mtr,
    500mm,
    100mm
    12
    10
    10
    Resource
    Panel
    NA - 24VDC power supply. 8 Relay card PLC interfaceable with NO NC
    Panel contact & 24Vdc coil, Dual Timer WITH NO-NC contacts or
    Optionally LG PLC (12 input+ 8 output) with CDP & ladder software.
     
    Power
    Generation
    Power pack consist of : a) Tank 25L, b) Gear Pump 3LPM with ball valve for flow measurement in Beacker (optional), c) Electric motor 0.5
    HP 1440 RPM 230VAC, d) Air Breather Oil level indicator, sunction filter / Stainer, Return line filter, 70 Bar Gage, e) Relief valve.
    Mechanical
    Dimensions
    Anodised sturdy Aluminum profile rack (table top) with groove experiment board (Optinally double sided).
    Total dimension : 116 cm (L) x 91 cm (H) x 30 cm (W), Aluminum Grooved T bolt Board : L = 107 cm, W = 70 cm. Reclining at 0, 20, 30.
    Oil Tray (107 cm x 300 cm x 2 cm) Powder coated MS Net Weight : 125 Kg, Gross Weight : 150 Kg.
    Optional
    Experiments
    only for Electro-
    hydraulic Trainer
    1) Servo position control (Close loop) consisting of CIP panel with servo control using relay control circuit, EMT8 power supply for stroke length
    display, linear motion (100 mm, stroke) potentiometer (5K ) as a position sensor coupled to D.A. cylinder.
    2) Proportional flow and direction control valve with built in amplifier with 5V I/P voltage to control flow and direction 5K servo pot to sense
    position coupled to D.A. cylinder, open loop position control, EMT8 panel to display stroke length.

Downloads
8_CONTROL_LAB_07.PDF
VPL Infotech & Consultants 301, Savitri Sadan II, 15 Community Centre, Preet Vihar Delhi, India Tel: +91-11-22542234,22546754
Copyright 2002 VPL Infotech & Consultants     Website designing, hosting, and promotion by Sagacious Softwares, India