| FEATURES |
- 50 Mega Samples per channel per second max.
- 32/48 TTL test channels
- Built in Versatile triggering with pre-triggering view
- Attach to any IBM PC/XT/AT compatible computer.
- Many power commands to help user manipulate the graphic display
- Test data (state table) saved in DOS ASCII format.
- Facility to save sampled data configuration.
- User's Manual
- IBM Bus compatible
| SPEFICICATIONS |
- No. of Channels: 32/48
- Frequency: 50 MHz
- Input Impedance: 1 M Ohm, Input Capacitor : < 5P
- Input Voltage:+25V transient +10V continuous
- Threshold Voltage: TTL (1.4V)
- Setup Time: 4 µsec in internl mode
0 µsec in external mode
- Hold Time: 0 µsec in internal mode
8 µsec in external mode
- Trigger Format: “0”, “1”. “Xs”
- Trigger Setup Time: More than 20 µsec
- Trigger Position: 128 to 1920 data before trigger and 1920 to 128 data after trigger in 100 MHz mode. 64 to 960 data before trigger and 960 to 64 data after trigger in other frequency.
- Memory Capacity: 1k data/every channel
- Display State: ASCII, Binary, Decimal, Hexadecimal in one screen at one time
- Display Timing: 24 Channel waveform in one screen. The display indicates the time between the cursor 1 and cursor 2. Repeat: Automatically starts a new data acquisition one second after the completion of the previous one.
- Repeater on Trigger: Automtically starts a new data acquisition cycle after the completion of last cycle and upon detection of trigger word.
- Files: DOS operation, Save and Load data, Delete and Rename catalog files.
- Printer: Print all data on screen to printer
| |
|
|
|