CRT	Effective acting surface of oscilloscope	8 x 10DIV 1 DIV = 10mm
	Accelerating Voltage	+14kV
	Lightening color	Green
Z-Shaft input	Sensitivity	5V
	Polarity of input	Low electrical level intensification
	Range of frequency	DC:0-1MHz
	Input resistance	10K W
	Max. input voltage	50V (DC + AC peak)
Vertical amplifier	Width of band	DC: 0-40MHz AC: 10Hz - 40MHz
	Mode	CH1, CH2, ALT, CHOP, ADD
	Input impedance	1MW ±3% 25pF ±5pF
	Input coupling	DC - GND - AC
	Polarity inversion	Only CH2
	Max. input voltage	400V (DC + AC peak)
	Defection factor	5mV/DIV -5V/DIV ±3% expanding to 1mV/DIV
	Trimming ratio	2.5 : 1
Horizontal	Time factor	0.5s/DIV-0.2µS/DIV ±3%
	Trimming ratio	2.5 : 1
Trigger system	Mode	AUTO, NORM, TV, P-PAUTO
	Trigger source	INT (CH1, CH2, VERT MODE), LINE, EXT
	Slope	Positive or negative
	Trigger sensitivity	INT: 1DIV, EXT:0.3V, VERT MODE: 2DIV, P-PAUTO: 2DIV
	TV	2DIV
	Max. input voltage	160V (DC + AC peak) exterior trigger input
	Input impedance	1mW ±3% 25pF ±5pF
x-y acting	Defection factor	Same as vertical system
	Width of band	DC:0-1MHz AC:10Hz-1MHz
	Phase difference	less than or equal to 3°(DC: 0-50KHz)
Calibration source	Pole detecting standard	1KHz ±2% 0.5VP-P ±2% Symmetrical square wave
Power	Voltage range	220V ±10%
	Frequency	50Hz ±2Hz
	Max. power consumption	40W
Form size	Weight	6.5kg
	W x L x H	310 x 148 x 130mm
Other	Attachments	One operation manual, one standby fuse, one power wire, two detectors