| Data Logger |
With just one function module, DASYLab works as a high speed
data logger, able to acquire data at speeds up to 1MHz storing them
onto hard disk using the built-in disk streaming function.
| Multi-channel Chart Recorder |
Two function modules create a .paperless. multichannel chart
recorder with many options to adapt the displayed charts to your
own needs.
| Two-channel Oscilloscope |
Use the Y/t chart display module to visualize "fast" data. DASYLab
is just as simple to use as an oscilloscope, with continuous online
data acquisition and visualisation at speeds up to 250 kHz.
| Trigger Monitoring |
You can continuously monitor a signal with one of the many
DASYLab Trigger modules. The TTL-level output signals are useful
in many control applications or can simply control the data flow in
the program.
| Frequency Analyzer |
Complex signal analysis is quickly configured using some of the
Easy-To-Use function modules. Just add a FFT module to the
oscillocope setup, and you have a Frequency Analyzer.
| Frequency Maximum |
If the maximum frequency in your frequency spectrum is of interest
to you, just enlarge the DASYLab .Frequency Analyzer. with an
additional Y/t chart module, Statistics module and a Digital Meter
module. Instantly, your Signal and the frequency spectrum are
shown as charts, and the maximum frequency is displayed as a
digital value.
| Reference Curve Monitoring |
If you need, for example, to check the thermal response using a
predefined temperature curve, DASYLab provides the Sequence
Generator module, the Check Reference Curve module and the
Digital Output module - all suitable instruments for this type of
control application.
| Interfaces |
In addition to hardware drivers used to access the specific hard-ware
devices of different manufacturers DASYLab offers also
several standard interfaces such as RS232, GPIB, DDE and CAN.
| IVI |
Data acquisition and control with IVI compatible devices. Support
of the classes Oscilloscope, Digital Multimeter and Frequency
Generator.
| OPC 2.0 |
Write and Read access to tags in OPC Server with the specification
2.0.
| DASYLab supports DAQ hardware from the |
- adac Corporation ADLink ADLink Advantech Advantech ADTEK System Science Analogic Axiom Contec Microsystems Data Translation DEWETRON Eagle Ernst Gerδtebau GaGe GW Instruments IED Innovative Integration IOtech Inc. Measurement Computing Measurement Systems National Instruments Quatech Siemens Softing Spectrum TEAC ADDI DATA
Multifunctional DAQ Driver
NuDAM Driver
Multifunctional DAQ Driver
ADAM Driver
Analog Devices
Acqutec
BMC Messsysteme GmbH
CyberResearch
Data Electronics/Datataker
DGH
Elan
΅-Epsilon
Goldammer
IBR Messtechnik
Ines GmbH
Intelligent Instrumentation
Keithley/Metrabyte(ComputerBoards) Microstar Laboratories
Omega Engineering
Phoenix Contact, Interbus S
Solartron
SORCUS Computer GmbH
STAC
UEI
| DASYLab Net |
This powerful extension of DASYLab is able to communicate with
and control remote copies of DASYLab Net on any network that
uses the TCP/IP Protocol. DASYLab is able to:
- Exchange data at rates up to 100 000 samples per second.
- Display messages to other running DASYLab programs.
- Remotely start, stop and load experiments, including simulta-neous
start of several DASYLab Net systems.
- Password protect client server/access.
- Automatic time zone correction on server and client, if different.
- Run under Windows 98 and Windows 2000 / NT.
| | | | | | | | | | | |
|
|
|